| | SKU | | | | | Form Factor | | Extended ATX | | Dimensions | | 12.05" x 13.05" (30.6cm x 33.2cm) | | | | CPU | | • Dual mPGA700 ZIF Sockets • Supports up to two Intel® Itanium® processor(s) with 9MB Integrated Advanced Transfer Cache up to 1.60GHz | | System Bus | | 400MHz system bus | | | | Memory Capacity | | • Eight 184-pin DIMM sockets • Supports up to 16 GB DDR200 memory • 4-Way Interleaved Memory • 4x Memory Modules must be populated at the same time | | Memory Type | | DDR200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | DIMM Sizes | | 512 MB, 1 GB, 2 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | • Intel® E8870 chipset • SNC + SIOH + MRH_D + SPS + ICH4 + P64H2 | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | Network Controllers | | • 2x Intel® 82546EB Gigabit Ethernet • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | PCI Expansion | | • 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 6x USB 2.0 ports | | Serial Ports | | • 1x External Serial Port • Internal header supporting 2x Fast UART 16550 serial ports | | | | | | 1U Chassis | | • SC813Hi-500 | 2U Chassis | | • SC823Hi-R500RC | | Important Note | | To ensure system stability, a 500W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. | | | | BIOS Type | | 6MB AMI® Flash BIOS (total of 6x BIOS Chips) | | BIOS Features | | • Plug and Play (PnP) • SMBIOS 2.3 • PCI 2.2 • ACPI 1.0 (limited) • Hardware BIOS virus protection | | | | Software / Hardware | | • Optional IPMI (Intelligent Platform Management Interface) 1.5 • SuperDoctor® III • Watch Dog | | Power Configurations | | • ACPI/APM Power Management • Main Switch Override Mechanism • Wake-On-Ring (WOR) header • Keyboard Wakeup from Soft-Off • CPU Fan auto-off in sleep mode • Power-on mode control for AC power loss recovery • Internal/External modem remote ring-on | | | | Voltage | | • Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby • CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.1V-1.5V • Auto-switching for VRMs | | FAN | | • Total of eight 3-pin fan headers • 8x fans with tachometer monitoring • Overheat backup fan connector • Status monitor with firmware/software on/off control | | Temperature | | • Monitoring for CPU, chassis, environment • CPU thermal trip support • Thermal control for 8x fan connectors • I2C temperature sensing logic | | LED | | • CPU Overheat LED • System Overheat LED • Suspend-state indicator LED | | Other Features | | • Chassis intrusion detection • Chassis intrusion header | | |